Specs
What is the OS-1 capable of?
Specs
What is the OS-1 capable of?
Specs
What is the OS-1 capable of?
It’s the Little Things that Matter Most
It’s the Little Things that Matter Most
~7.6 µm
Single pixel size
Validated
Validated
±2 µm
Printing accuracy
Validated
Validated
~18 µm
Min. channel width
Validated
Validated
OS-1 Renderings
What is the OS-1 Difference?
What is the OS-1 Difference?
Unbeatable precision. Unprecedented size.
Side-by-side comparison of the OS-1 against leading commercial DLP and LCD printers.
| OS-1 | Asiga MAX X27 | Anycubic Photon D2 | Elegoo Mars 4 Ultra | |
|---|---|---|---|---|
| Cost (approx.) | $70,000 Best precision/$ | $20,000 | $650 | $250 |
| Build area X,Y | 19.5 × 12.2 mm | 51.8 × 29.2 mm | 131 × 73 mm | 153.3 × 77.76 mm |
| Resolution (pixels) | 2560 × 1600 | 1920 × 1080 | 2560 × 1440 | 8520 × 4320 |
| Pixel size | 7.6 µm Smallest | 27 µm | 51 µm | 18 µm |
| Layer height | 10 µm | 10 – 100 µm | 10 – 150 µm | 10 – 200 µm |
| Wavelength | 365 nm Optimal | 385 nm | 405 nm | 405 nm |
| Resin photo absorber | NPS, Avobenzone | NPS | Sudan I | Sudan I |
| Technology | DLP | DLP | DLP | LCD |
| Tuned LED spectral output | Yes | No | No | No |
| Auto-focus | Yes | No | No | No |
| Irradiance non-uniformity correction | Yes, to 0.2% | No | No | No |
µm = micrometers · nm = nanometers · All values approximate
The OS-1 is one of a kind.
Build an OS-1 for your team using our free, open-source schematics and training resources.
~7.6 µmpixels
~10 µmlayers
~18 µmchannels
OS-1 | BYU Microfluidics
The world’s leading open-source microfluidic 3D printer, with 7.6µm resolution, tuned LED spectral output, auto-focus, and irradiance non-uniformity correction to 0.2%.
Contact Us
Provo, UT 84602, USA
© 2026 Brigham Young University
Privacy Notice | Cookie Preferences